Scuba clinic tools. There are 6 different pin sizes (1.

Scuba clinic tools. This tool issuitable to remove or adjust the orifice of Scubapro Air2 (all models). 1. 00 USD No more excuses not to use 2 spanners when putting the hose on and off the second stage! The size of this thin spanner is 13/16". The kit contains the following 6 tools : SCT-0523 3/16" Allen key, Extra Long SCT-0780 Plug Tool for Scubapro Second Stages SCT-1787 Inflator Stem O-Ring Installation Bullet for Scubapro Air2 3rd - 4th This chrome-plated brass cylinder silencer is used to reduce the noise made by the flow of air when a cylinder is being emptied. This kit contains the essential speciality tools to perform service works on Apeks first and second stages (XTX, AT, ATX, TEK3, BLACK PEARL, FSR, TUNGSTEN) and BCD's. Never miss a dive again! This unbalanced version of inline adjustment tool is designed to work with hex orifice type second stages. This flow bench has been designed to be used in combination with our Adjustable Bench Air Supply and our Analogue Advanced Set-Up Kit (-5-0-5 differential pressure gauge option) or Digital Advanced Set-Up Kit (-5-0-5 differential pressure gauge option). 90 USD Genuine service kits. 782. It features 6 mm hex drive w The function of this tool is to separate the valve body of the Apeks low profile swivel inflator valve. 1". 250. It is also compatible with our range of in-line adaptors: SCT-0814 In-line Adjuster Adaptor for Scubapro Air2 and Atomic SS1 SCT-0820 A collection of allen keys. It is made with light-weight blue-anodized aluminium 7075, incorporating a 1/2" drive to be used together with a torque wrench or other wrench (not included). The tool is made from stainless steel and features a T-handle for easy operation. 01" to . 5 mm and 8 mm. It provides an easy method for second stage set-up and adjustment. This mouthpiece assembly is made from Ac This thin-walled stainless steel 6-point socket is designed to fit the yoke nut of all various first stage regulators such as Oceanic, Hollis, Aeris, Dive Rite, just to name a few. This 1 1/2" crowfoot spanner enables the technician to properly remove, install and torque cylinder valves. Click here for more. Air use only. These charges are the buyer's responsibility. In-line adjustment tool is sold separately. accept no liability for any loss, damage or injury however caused resulting from information contained in these notes. To make a choice from our extensive range of scuba service tools, we have divided our shop into a number of collections like specialized tools, instruments and tool kits. To facilitate positioning duri Make up your own save-a-dive kit with this selection of products that will make a great additions to your save-a-dive kit. The kit contains: SCT-0765 Inflator Tool for Apeks Drysuits SCT-0766 Dump Valve Tool for Apeks Drysuits SCT-0767 Back Nut Tool for Apeks Drysuits This tool is used to properly install the piston busing assembly into the first stage body of the 1st stage of the Scubapro MK25 and MK25 EVO. Made out of aluminium 7075 makes the tool durable and lightweight at the same time. This version of inline adjustment tool is fitted with a dual drive: one side contains a slotted drive and the other side contains a 5 mm hex drive. It also fits over the elbow dump assembly of the inflator. This combination will create a versatile powerhouse in testing ca Aqualung original spare parts. It is the responsibility of the reader to verify the correct information, practises and procedures prior to commencing work. The tools are made from stainless steel and acetal. This tool provides a stable platform for the first stage to be held on a bench on clamped into a vise. Our “turnkey” kits have been designed with dive centres and professional scuba repair centres in mind. Regulator and parts are not included. Specialized tools for Scubapro regulators. This tool is suitable for valves measuring 78mm x 47mm. This kit contains: QTY Part # Item 1 SCT-0759 Yoke Nut Socket 19 mm 1 SCT-0760 Yoke Nut Socket 1" 1 SCT-0761 Yoke Nut Socket 26 mm 1 SCT-1732 Yoke Nut Socket 25 mm for Scubapro First Stages 1 SCT-1733 Yoke Nut Socket 25 mm for Mares This kit contains the essential hand tool that are required to perform service works on regulators and BCD's of any brand. The tool can be used in conjunction with a 3/8" driv Aqualung original spare parts. Specialised tools for Mares regulators. The in-line-adjuster can now be used to adjust the orifice position in accordance to the manufacturer's Specialized tools for Scubapro regulators. The tool works best This kit contains the essential speciality tools to perform service works on Atomic Aquatics first and second stages. We recommend opening the valve by 1/4 turn. Great addition for your save a-dive-kit, This heavy-duty seat extractor is used to install and remove crown/hard seat from all Aqualung first stages with a removable crown/hard seat. Find quality standard and specialised tools for scuba repair and service works at affordable prices. 0 x 50 x 0. 3 mm, 2. It incorporates a 3/8" square hole to be fitted with a torque wrench. Welcome to the Scuba Clinic Tools shop, your one-stop online store for scuba service tools. A must for every serious technician. We tried this tool successfully on some Dive Rite, Hollis and Oxycheq BCD's. It fits a wide variety of dip tubes with sizes 6 mm, 1/4", 6. Special Tools for Aqualung® Regulators Specialised tools for Aqualung regulators. Comes in a blow-molded plastic case, user's instruction manual as well as a calibration certificate. It can be used stand alone,lying flat or could be wall or panel mounted. This tool can be simply screwed onto either 200 bar or 300 bar DIN valve. Regulator or parts are not included. Note this tool is not suitable for removing soft high pressure seat from first stage piston. 417" - silver 38 mm - 1. The pair of pins are N Our collection of modular c-spanners come in a range of 5 different colour coded diameter sizes including: 34 mm - 1. Dive computer is not included. This tool is made exclusively for the Apeks Flight and Apeks XL4 second stage regulators. Item will be shipped within 3 working days. For detailed description of the individual items refer to the individual product pages. Selection of standard and specialised spanners used on the regulator bench. The stainless steel rod is the extractor tool used to Fully adjustable pin or face spanner (also know as cup tool) that will accommodate for a distance between the pins of up to 60 mm. The use of the tool will protect the delicate part fr This open ended spanner set consists of 3 spanners of the most common imperial sizes used in scuba service work. Online store for standard and specialised scuba equipment service tools. This oil-filled IP gauge is not only designed for technicians, but also for divers who would like to check the IP output of their regulators. Machined from Acetal. 9 mm, and 4. This custom fixture is made to fit SCT-1008 Cylinder Valve Stand 3/4" 14 NPSM (*) and SCT-1009 Cylinder Valve Stand M25 x 2 (*) to allow the valve stand (when it is fitted with a flexible hose) to be easily fitted onto a workbench. $278. Specialised tools for Dive Rite regulators. It might be requir This tool will assist the technicians in the assembly and disassembly of the AST system for yoke-style Mares first stages. We offer 15 kits to choose from. We have also included some more specialized tools to facilitate your job. 5" and coved with a rubber protective boot. Inflator or p This kit contains the essential speciality tools to perform service works on basic Aqualung first and second stage entry level regulators (CALYPSO) and BCD's fitted with the Powerline inflator. They A collection of tools commonly used in scuba scervice work. During use make sure the tool is carefully aligned in all planes with the button as to avoid damage to the delicate computer and tool. This kit contains: Specialised tools for Apeks regulators. The tools is suitable for cylinder valves of brands such as Thermo, XS Scuba and possibly others. U. This aluminium pit reference gauge will assist the visual inspector in accurately assessing the depth of external or internal pits found on a cylinder. 0 x 40 x . This digital intermediate pressure gauge is ideal for the professional technician or repair facility and will live up to the requirements of higher precision. The tool is made from Acetal. The body is made from stainless steel with pins to fit a variety of K power inflators such as Apeks,Hollis and Oxycheq. Not only does it provide a good fit for both the plastic (part # 11. The tool locks the grommet in place while screw on the opposite side is tightened or loosened. (For the MK11 and MK17 we recommend our designated tools). Torque can be applied to the part by capping a 1/2" socket on the tool and using an appropriate torque wrench. As to isolate the effect of the different adjustment options, one adjustment option at the time is being shown whilst the other adjustment option remains fixed. The adjustment tool is fitted with a 2", 0-300 PSI (0-20 bar) pressure gauge with NBR rubber protective cover and compatible with our range of The mat provides a flat non-slip surface for the equipment being serviced and prevent the parts from being scratched. 120) and the metal (part # 11. Regulators and LP ho This specially designed C-spanner is made to fit popular models of Scubapro first stage regulator such as MK2, MK5, MK10 and MK25. A must-have for all technicians! Regulator and parts are not included. The tool features a 1/2" square drive and can be used with a 1/2" drive torque wrench, 1/2" drive swivel handle Economy preset adjustable torque wrench with a working range of 5-60 Nm. 75 mm and the tool has an overall length of 6. This tool is made from chrome-plate This Wiha tool set contains the following nut- and screwdrivers: Phillips PH0 x 75 Nutdriver 5. 496" - blue 40 mm - 1. 106) versions of the part, the wrench also features The kit contains the following 7 tools : SCT-1789 Cover Tool for Scubapro Air2 SCT-1766 Poppet Assembly Assist Tool for Scubapro Air2 5th Gen SCT-1767 Inflator Stem O-Ring Installtion Bullet for Air2 5th Gen This tool set has all the specialty tools required for the service of Apeks drysuit valves. 7 mm, 2. This torque wrench is extremely suitable for regulator service work. 8 mm, 3. The unit comes in a protective box. Length overall is 302 mm. 106 and # 11. Ensure that the holes on the cover ring are properly aligned with the pins of the tool prior to installing or removing the cover ring. With the back nut removed, screw the tool onto the threaded section of the valve body till the valve body and base separate. Inflator and parts are not included. Chrome-vanadium 3/6" extra long allen key. This balanced inline adjustment tool or dual inline adjustment tool will fit most second stages on the market including those with deeply-seated orifices (eg. The angled mirror provides visibility in inaccessible area such as the bottom side of the threads. 40 USD These sturdy o-ring picks come as a set of 2. Scubapro R190 This basic version of an unbalanced inline adjustment tool is designed to work with slotted orifice type second stages. Accuracy 0. It has a 3/8" drive. Specialised tools for Atomic Aquatic regulators. , Ltd. The adapter is made from brass with chromed finish. Please note that the picture is for demonstration purpose only and do not reflect an actual product. This tool rack is a perfect accessory for technicians to keep their day-to-day used specialised tools organised and at the same time easily accessible on the workbench. . This yoke nut tool allows the easy removal and installation of yoke nuts (19mm, 26mm and 1"). The wrench has both open and close-ended sides that make this wrench suitable for the Apeks MTX-R heat exchangers. $234. Regulators are not included. Our selection features some generic as brand specific tools to assist the technician. The size of this thin spanner is 28 mm. Nov 16, 2018 · How to gear up for servicing regulators? Choosing the tools or kit (s) that are right for you Posted by Pia Limpiyasrisakul on Nov 16, 2018 Specialised tools for Apeks regulators. SHIPPING TO UNITED STATES: Under the new tariff regime, 800 USD De Minimis exemption WILL still be in place. Its use is recommended for removal and installation of the yoke nut as opposed to using an adjustable spanner to avoid slipping and damagin A collection of pin, hook and c-spanners. Length 4” (105 mm). 2 mm) available for use with this modular version of face spanner. It is the responsibility of the reader to verify the correct information, practices and procedures prior to commencing work. $138. Cracking Effort Adjuster for Scubapro Second Stages with Draw Back Poppet A collection of o-ring picks. It is designed to fit all major brands of regulators (Scubapro, Aqualung, Mares, ). 5, 2, 2. Made from chrome-plated steel. The plate features 10 different depths ranging from . Please note the picture is for demonstration purpose only and do not reflect actual product. This kit contains: QTY Part # Item 1 SCT-0810 Analogue Intermediate Pressure Gauge Professional 1 SCT-0818 Swivel Mount Panel for Professional IP and Differential Pressure Gauge There are 2 options for Differential Pressure Gauge The author, Scuba Clinic Co. 5” dial (from This BCD tool is designed to fit the over-pressure relief or dump valve of Scubapro BCDs, featuring 2 sides which work on both old and new-style of Scubapro dump valves. Regu This thin-walled stainless steel 6-point socket is specially designed to fit the 25 mm yoke nut of Scubapro first stage regulators (with the exception of some very old model for which you will need a 1" socket. As an alternative to our 4-in-1 Powerline Inflator Tool, this heavy duty version valve core tool serves the essential function of installing and removing the valve core of Powerline Inflator. The removable T-handle makes the tool more compact for storage. This assembly is used to connect the second stage regulator by the use of a band seal to a differential pressure gauge for setting up or checking the cracking effort. The tip size is 1. This model can be used in conjunction with the hose protector installation to This tool is used to remove and install the Scubapro Air2 cover ring (generation 4, 5). 654" - grey The tools are made of anodized Aluminium 6061 and can be used with a 3/8" ratchet or torque wrench A collection of tools used for BCDs. B. This kit contains: SCT-1104 Starter speciality tools kit for Apek This heavy-duty tool has the functions of removing and installing the valve ring (bezel poppet) and the inflator flange (bezel of the control valve - inflator ring) of the Mares Airtrim system as well as the cap of dump valve (part# 47159056) on various Mares BCDs. The fixed pin size is 2. The adjustment tool is fitted with a 2", 0-300 PSI (0-20 bar) pressure gauge with NBR rubber protective cover. This tool provides a stable platform for the first stage to be held on a bench or clamped into a vise. 5 mm x 60 Nutdriver 1/4” x 60 Slotted screwdriver 2. Made of Acetal. Parts are not included. O-ring picks are essential for regulator servicing, these tools can be used to install and remove o-rings and various other parts such as washers and diaphragms. This kit contains: SCT-1103 Start This piece of equipment is great addition for professional scuba repair center as it allows the technician to adjust the output pressure of the bench supply to suit his or her needs during testing and set up of a regulator in order to simulate a variety of supply pressure conditions for the first stage. The HP seat extractor tool provides an easy method for removing the HP seat from the end of the flow-by piston of first stage regulator. Made of acetal and fitted with stainless steel pins. Scuba Clinic will not be held liable for any injuries, deaths or damages resulting from unauthorised or misuse of our products. The instruments featured are accurate and can be used both on the bench as by a travelling technician. The rack features 47 holes and slots of different sizes to fit various tools such as yoke nut sockets, screwdrivers, o-ring picks, pliers, bullets, fir Specialised tools for Mares regulators. Easy installation of the o-rings is now possible without damaging the o-rings on the threads. The dimensions are 37 x 54 cm with 5 mm thickness. We recommend to use: the open ended side to hold the nuts/heat exchangers in place This adaptor allows the technician to easily adjust the orifice of Aqualung Airsource 3. 04 Slotted screwdriver 3. accepts no liability for any loss, damage or injury however caused resulting from information contained in these notes. This thin-walled stainless steel 6-point socket is designed to fit the yoke nut of all Aqualung first stage regulators as well as Apeks Flight. Disclaimer: Scuba equipment servicing is ONLY to be performed by certified technicians. 25”. Aqualung original spare parts. Made from Acetal with stain This light-weight aluminium splined wrench is designed to fit Scubapro low pressure hoses and most models of jam nuts on second stage regulators. This is handy especially when you already have a Seaquest Airsource/Powerline Tool. 005) of the BCD. The set contains the following open ended spanners: 12 x 13 mm 14 x 15 mm 16 x 17 mm 18 x 19 mm Made from chrome-vanadium and suitable for heavy duty use. This dip tube wrench is for installing or removing the older-style dip tubes with no slot or hex. Download your instruction manual here. Apeks original spare parts. It is made from acetal and fitted with stainless steel pin. The tools are made of This dual side cover tool will assist the removal and installation of the second stages covers of all Apeks XTX series. This tool serves the following 2 functions: To remove the venturi lever from the casing by placing the stepped side of the tool onto second stage casing with the recess placed over the venturi lever and pressing down on the opposi The kit contains 9 pcs of ball ended hex keys: 1. One side is used on the old version and the other side works with the new version by gripping into the purge button. This heavy-duty first stage holder is made from stainless steel 304, incorporating both LP (3/8 UNF) and HP (7/16 UNF) threads at each end. This pressure gauge and adaptor assembly is suitable for SCT-0808 Balanced In-Line Orifice Adjustment Tool (sold separately). 5, 3, 4, 5, 6, 8, 10 mm. Based on our vast experience in the field we have come up with a selection of hand-picked quality tools commonly used in scuba repair and service works. To install the hose protector on to the hose, install the hose protector onto the rod, thread the hose onto th This three-pin socket is designed to facilitate the change of Scubapro Hydros Pro Colour Kit. Dis-assembly, re-assembly or set-up of regulators often requires specialized tools to complete the job efficient. 00 USD The author, Scuba Clinic Co. Maximum working pressure 207 bar (3000 PSI) with stainless steel braid protection. Mad Scuba Clinic sets the item (s) declared value in compliance with customs declaration laws. 263. Its use is recommended for removal and installation of the yoke Specialised tools for Aqualung regulators. 575" - purple 42 mm - 1. 5 The ideal set for the regulator technician. They This digital pit gauge will assist visual cylinder inspector in accurately accessing the depth of defects found on a cylinder (isolated pits, corrosion, cuts, dings, gauges) The sharp needle tip allows access to even the smallest pit found. 5 m heavy duty high pressure air hose, with 1/4" NPT male and DIN 232 fitting. 339" - black 36 mm - 1. 00 USD Save $31. Anodized blue finish. This kit contains: SCT-1101 St A collection of tools used for scuba cylinders and valves. The text below uses some simplified schematics to illustrate the effect of different adjustment options for downstream second stages or demand valves. 5 cm long with a knurled handle and a 20 mm mirror mount. 4% FS This thin-walled stainless steel 6-point socket is designed to fit the yoke nut of all Apeks first stage regulators except the Apeks Flight. Regulator is not included. The fitting is made from chrome-plated brass. Features: Larger-LCD display for easy r This face spanner or compass wrench is a must-have for scuba technicians. The tool is ideal for the inspection of the cylinder neck threads of M25 and 3/4" 14 NPSM cylinders. Lever Height Adjuster for Aqualung Conshelf Second Stage Specialised tools for Thermo Valves. About Us Located in Chalong, Phuket, Thailand, Scuba Clinic is modern and fully-equipped workshop dedicated to the manufacturing of specialised scuba service tools. It contains the following open ended spanners: 1/2" x 9/16" 5/8" x 11/16" 11/16" x 3/4" Made from chrome-vanadium and suitable for heavy duty use. This stainless steel 304 tool is made for the removal and installation of the push buttons of Suunto dive computers. Shop for instrumentation, tool kits, specialised tools and more from Scuba Clinic Tools. Fits a variety of brands like: Apeks, Mares, Sherwood and Aqualung. Import duties, taxes, brokerage fees and other charges are not included in the item price or shipping cost. This light-weight version of a valve removal tool is great for travelling rebreathers divers that are required to remove the cylinder valves prior to air travel. The mouthpiece with band seal provides a leak-tight and universal fit for second stages. The selection is hand-picked and includes generic and special tools. This plastic tool is used to remove and install bladder flanges on older-style BCD's. Special Tools for Poseidon® Regulators Specialised tools for Poseidon regulators. Orders valued under 800 USD will remain tax-exempted. The tool securely clamps around the dip tube by using the knob to tighten it without damaging the part. Find the widest range of scuba diving tools available online today. This tool is designed to enable easy removal and installation of SCBA cylinder valves. Our range include quality standard hand tools, specialized hand tools and c Special Tools for Oceanic® Regulators Specialised tools for Oceanic regulators. 755. Features of the gauge: Pressure range: 0-25 bar with real-time reading. Position the bushing assembly in the correct order on the thin shaft of the tool (side with smallest diameter) and insert the tool with the assembly into the first stage body. A collection of multitools. Care must be taken to align the dot (marking) on the tool with one of the metal dots (pins) on the second stage cover. This hose is suitable to connect SCT-0817 Adjustable Bench Air Supply to a scuba cylinder. The fixture is required to be mounted onto the workbench. The gauge provides an accurate reading through 2. Made from Acetal and stainless steel. 22 mm Socket 3/8" Drive$9. This tool set has all the specialty tools required for the service of Apeks drysuit valves. A collection of o-rings and o-ring kits This kit contains the essential speciality tools to perform service works on basic Mares first and second stage entry level regulators (R2, 2S, ROVER SERIES) and BCD's fitted with the Ergo inflator. Made from Aluminium with vibratory tumbled Made from brass, the tool is handy for installing LP and HP O-rings onto hoses or port plugs by simply capping the tool on top of the equipment and sliding the o-ring on. This item is the adaptor ONL Made from stainless steel rod, this tool enables technician to easily install hose protectors on to high and low pressure hoses. Designed with durability and functionality in mind, this tool kit ensures the safety and efficiency of any dive outing. It is a general hand tool that will find lots of uses in scuba service work. Its use is recommended for removal and installation of the yoke nut as opposed to using an adjustable spanner to avoid slipping and damaging the part. 60 USD Save $15. This kit contains: QTY Part # Item 1 SCT This kit contains the essential speciality tools to perform service works on basic Scubapro first and second stage entry level regulators (MK2, MK2+, MK2 EVO, R095, R195) and BCD's fitted with the BPI. Please note that the picture is for demonstration purpose only and do not reflect actual product. Pictures show the tool in use on the Mares H. There are 6 different pin sizes (1. This kit contains: SCT-1102 Starter sp Collection of tool kits suitable for the regulator service shop. Scuba Tools is a provider of dive maintenance tools and scuba test equipment. The pins of the tool engage with grommet / nut (part# 21. In-Line Adaptor for Aqualung Calypso and Apeks Flight Hoses In addition to the tools of the the starter speciality tools kit for Apeks, this advanced speciality tool kit will allow you to work on the following regulators: MTX, MTX-R, DB4, and XL4. This universal pin spanner is designed to fit environmental caps and diaphragm retainers for various brands of first stages. The gauge is fitted with a quick connector that fits standard BCD inflator hoses and a booth to protect the gauge. Available in blue only. The tools incorporate both sharp tip ends (straight and bent) as well as flat tips ends. The kit contains: SCT-0765 Inflator Tool for Apeks Drysuits SCT-0766 Dump Valve Tool for Apeks Drysuits SCT-0767 Back Nut Tool for Apeks Drysuits This BCD Power Inflator Tool is useful for the removal and installation of the internal assembly and inflator button. It is used by simply placing the tool through the base of the piston and Anyone with some experience in servicing scuba equipment will have encountered one of the following situations: 1/ seized parts (damn, I can get the bugger loose), 2/ technician induced damaged parts (damn, I just damaged the customers’ equipment) and 3/ broken or damaged tools (damn, why did that tool just snap). Our store stocks a variety of the most commonly used scuba service tools. This tool is used to remove and install the flow vane plug of the Scubapro D420 second stage. It features 6 mm hex driv Fully adjustable pin or face spanner (also know as cup tool) that will accommodate for a distance between the pins of up to 60 mm. The threaded side of the tool is screwed into the DIN (BSP / G 5/8 - 14) valve and the handle can be turned to loosen the valve whilst the cylinder is secured. This kit contains the essential service tools required to perform service works on regulators and BCD's of any brand. This kit contains: QTY Part # Item 1 SCT-0133 Torque Wrench 5-60 Nm 1 SCT-0204 Side Cutters, blue 1 SCT-040 Apeks original spare parts. It is used in conjunction with the Scuba Clinic Tools t-type first stage holder. The tool will support the parts over a large surface area and since the pin is tensioned between the part and the tool it is impossible for the pin to slip and create damage. This i This heavy-duty first stage holder is made from stainless steel 304, incorporating both LP (3/8 UNF) and HP (7/16 UNF) threads at each end. Made from heavy-duty but lightweight aluminium, the diameter has been carefully chosen to give the best fit on the cap and diaphra This adapter allows the technician to easily adjust the orifice of Oceanic second stages equipped with a swivel hose - such as on the Oceanic Delta 4 second stage - using the SCT-0808 Balanced In-Line Adjustment Tool. This open ended spanner set consists of 4 spanners of the most common metric sizes used in scuba service work. The wrench also fits the diaphragm retainer (part# 10714110) of Scubapro MK17 Evo. ) It is also suitable for Cressi first stages. Any technician will need some instrumentation and adjustment tools to check and set-up the overhauled regulator set. You also will require some general hand tools, some items from our ‘basic service tools kit’, instrumentation and possibly an appropriate in-line adjustment tool. The Schrader valve stem tool is used to easily remove and install the Schrader valve stem inside the BCD inflator hose. In addition to the tools of the the starter speciality tools kit for Aqaulung, this advanced speciality tool kit will allow you to work on the following regulators: TITAN, TITAN LX, CORE, MIKRON, LEGEND, ABS OCTO. As the buyer, you should be aware of possible delays from customs inspections and formalities. We recommend to use: the open ended side to hold the nuts/heat exchangers This stainless steel inspection mirror is approximately 16. Please note that the picture is for demonstration purpose only and do not reflect the actual product. 3 mm, 3. We still regularly get the question from scuba service centers and single technicians, Which tools do I need? The kit contains 9 pcs of ball ended hex keys: 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8. Mar 9, 2017 · With Poseidon either refusing to sell, or charging an insane amount of money for their specialty tools, I bought all of the tools from Scuba Tools Clinic out of frustration when I couldn't get some used Jetstreams apart that had some salt corrosion. Features: Press This in-line adjuster adaptor is designed to work in compatible with an In-Line Orifice Adjustment Tool. Visit our online store and pick your pro-built scuba tools out of a wide range of products, ranging from specialized scuba technician tools to standard hand tools that should be present in every dive technician shop. Valve parts are not included. Hose or parts are not included. The small threaded side fits the inlet fitting of Aqualung Airsource 3 while the opposite end attached to the in-line adjuster. Machined from Acetal and brass. The hose length is 1 m. A collection of standard hand tools commonly required in scuba service and repair such as allen keys, screwdrivers, nutdrivers and pliers. Our redesigned tool kits are entirely modular, this will make them more versatile, easier to choose from and eliminate duplicates in the several kits (to the extend this is possible). The adaptor is fitted with a quick connect coupler and it is compatible with Scubapro Air2 and Atomic Aquatics SS1 safe second power inflator. The dial of the gauge is 2. The rubber handle will provide a firm grip. The reading is shown in both bar (0-20) and PSI (0-300). 4 mm. The SCT-0901 Scuba Dive Tool Kit, a steel clinic for underwater repairs, is a must-have accessory for every serious scuba diver. The tool is also suitable to install the o-ring inside This unbalanced version of inline adjustment tool is designed to work with slotted orifice type second stages. Collection of tool kits suitable for the regulator service shop. Care has to be taken to ensure that the cylinder is properly secured: the This cover tool is used to remove/install the second stage covers of the Scubapro S620 Ti second stage regulators. 30 USD Save $26. This tool set enables technicians to easily remove and install the removable HP valve seat or hard seat in some Apeks first stage models including FSR (XTX200, ATX200, Tungsten and Black Pearl) and Black Sapphire. The wrench has both open and close-ended sides that are suitable for heat exchangers of the Apeks XL4 second stages. Regulator parts are not included. lefa jzmaxpr ewa kqitim ioxccro tyhuas gjzrwk xivg zwjidn bqyfsr